Stepper motors generally comes along with an IC ULN2003. This IC is used to drive motor because microcontroller pins are unable to provide sufficient current to drive these motors.
Set the TAP THRESHOLD to 2.5g. To do that we need to write 40 (2.5/.0625) to the THRESH_TAP Register. This means that you need at least 2.5g acceleration in Z AXIS in order for the tap to qualify as TAP.
UART have a feature called IDLE line detection and we are going to use this to sole the problem mentioned above. Idle line is detected on RX line when there is no received byte for more than 1 byte time length.
Servo motors use feedback to determine the position of the shaft, you can control that position very precisely. As a result, servo motors are used to control the position of objects, rotate objects, move legs, arms or hands of robots, move sensors etc. with high precision.